Pressure Switch

Pressure switches are used to make or break an electrical circuit at a preset hydraulic pressure.
The Pressure switch has two microswitches, each of which is capable of electrically detecting high pressure or low pressure setting. The microswitch structure is dust and drip proof structure.
Drain Piping Connect the drain pipe not to any other line but directly to the tank.

Features / specifications

Note: Sub-plates are available. Specify sub-plate model from the table above. When sub-plates are not used, the mounting surface should have a good machined finish.
The differential pressure means the pressure difference caused between at NC and at NO when one of the pressure on the high and low-pressure side is raised and then lowered.

Model Number

Max. Operating Pressure

Kgf/cm²

Max. Flow L/min.

Mass Kg.

BUCG-06-?-?-3080

210

125