Pressure Reducing Valve

Pressure reducing valves are used to set the pressure of a hydraulic circuit below that of the main circuit. Operation under remote control is also possible by using the remote control port
Pressure reducing check valves
Pressure reducing and check valves are used to set the pressure of a hydraulic circuit below that of the main circuit. They have check valves, which allow a free flow from the secondary side to the primary.

Features / specifications

Note: Sub-plates are available. Specify sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish.
In case of “Threaded Connections”, there are two threaded connections type primary pressure ports. They can be connected each other in-line; one as an inlet and the other as an outlet or the valve can be used by plugging one of the pressure ports.

Valve Name	Model Numbers		Max. Oper. Pressure Kgf/cm²	Max. Flow *1		Drain *2 Flow L/min.	Mass (Approx.)Kg.
	Threaded Connection	Sub-plate Mounting		Setting Pressure Kgf/cm²	Max. Flow L/min.		Threaded Connection	Sub-plate Mounting
Pressure Reducing Valve	RT-03-?-2280	RG-03-?-2280	210	7 - 10	40	0.8 - 1.0	4.3	4.5
				10 - 205	50
	RT-06-?-2280	RG-06-?-2280	210	7 - 10	50	0.8 - 1.1	6.9	6.8
				10 - 15	100
				15 - 205	125
	RT-10-?-2280	RG-10-?-2180	210	7 - 10	130	1.2 - 1.5	12.0	11.0
				10 - 15	180
				15 - 105	220
				105 - 205	250